類別：脫模劑（拋光蠟）
發布時間：2024-11-22 9:32:51
價格：￥0.00
M0811V3脫模蠟（8號蠟）玻璃鋼專用
Zyvax? 1070W 是一款無硅水性脫模劑，特別適用 于航空工業的高性能需要。Zyvax? 1070W 適用于 先進復合材料和金屬結合的所有模具類型和成型工 藝。
Zyvax? 1070W 水性脫模劑
Zyvax? WaterShield?是一種高性能聚合物涂層材料,能給出多次脫模效果。.Zyvax? WaterShield?能廣泛地用在大多數模塑成 型過程。如想了解最能滿足您要求的脫模劑系 統
Zyvax Watershield 脫模劑
拋光膏WENYAOYU2000#細拋...
掃描關注我們的 [ 微信 ] 更多優惠驚喜哦！
產品介紹
主要成分：巴西棕櫚蠟
產品型號：M0811
產品產地：美國.加利福尼亞州
凈重：311克（11盎司）
保質期：3年
采用巴西原產棕櫚蠟為原料，
采用獨特配方混合合成，
質量優異，
一次施用即可多次脫模，
特別適用于新模具。
脫模過程中使用方法簡單，使用量少，脫模效果明顯。
1950年 Malcolm Meguiar 發明了世界上第一款玻璃鋼模具專業脫模蠟。 美光8號蠟（M0811)誕生。經過國內玻璃鋼企業多年的應用被公認為最經濟，最有效的脫模材料。 FRP行業之經典傳奇脫模蠟，半個世紀暢銷不衰。一直被模仿，從未被超越。
適用范圍
適用于各類手糊玻璃鋼制品以及人造石樹脂澆注等產品。對不飽和樹脂，環氧樹脂，乙烯基酯樹脂均有良好的脫模效果。
使用方法
１.用干凈軟布（最好是棉布）以旋轉方法將蠟均勻地涂抹于模具表面。
２.靜置15分鐘后，再用潔凈的棉布將模糊的表層漸漸擦至光亮
３.使用舊模具時，只需涂抹一次即可，若使用新模具則需重復三至五次。
４.最后一次擦拭至模具表面光亮后，要靜置一個小時后才可以使用，已達到最佳脫模效果。
儲存方法
存儲在通風陰涼處，隔離熱源。
在開封使用后必須密封保存。
Product Description
Mold release agent is a chemical used to prevent other materials from bonding to surfaces. It can provide a solution in processes involving mold release, metal die-cast release, plastic release, adhesive release, and tire and PU foam release. Release agents provide the critical barrier between a molding surface and the substrate, facilitating separation of the cured part from the mold. Without such a barrier in place the substrate would become fused to the mold surface, resulting in difficult clean-up and dramatic loss in production efficiency. Even when a release agent is used, factors such as irregular applications or improper release agent choice may have a dramatic effect on the quality and consistency of the finished product.
Mold Release Wax Description SAKURAI Mold Release Wax is composed of carnauba wax with stable demoulding quality. The unique formulation can meet continuous demoulding performance. Application Mainly applicable for FRP, fibreglass,Epoxy resin composite and Unsaturated resin products. Features - Less dosage,use once can demould several times - Smooth and high gloss surface finished - Stable demoulding performance
1. Use clean cotton to wipe this wax uniformly on the mold surface by rotated method. 2. After 15 minutes a fuzzy layer created,then use another clean cotton wipe this fuzzy layer untill being gloss surface, after waiting for 1 hours, can start the production. 3. For old mold use wax only one time, but for new mold or cleaned mold,need use wax to wipe 3-5 layers.
1. Store in a cool, ventilated place away from the heat 2. After opening, need to seal up for storage if not use.
該產品沒有收到任何評價！
Copyright © 2018 All Rightsreserved 青島佳創新型材料有限公司 版權所有.
魯公網安備37021402002265號
技術支持：牽牛建站 | 中科商務網 | 網站管理